If you’re like most people, you probably have a soundbar to improve your TV’s audio. Soundbars are becoming increasingly popular because they provide better sound quality than most TVs.
However, one problem with soundbars is that they often have unsightly wires that can ruin the look of your home theater setup.
Fortunately, there are a few ways to hide soundbar wires and keep your home theater looking great. In this article, we’ll show you how to hide soundbar wires using three different methods.
Table of Contents
Make sure your TV is properly calibrated
While most TVs have volume controls that do not require you to press a button first, some do! Some models have touch-sensitive buttons that you must press to reduce the sound intensity or mute the audio completely.
Some soundbar brands seem to be getting away from this by no longer requiring you to use these features, instead offering an easy-to-use smartphone app that can control all of their settings.
But even if they don’t, there are still ways to hide the wires behind the television.
By taking time to check off everything as being muted or turned down low, you can easily conceal the source of the sounds. It is also important to ensure that your TV is in good working condition before doing so, as you do not want to risk having to rewire it later.
There are several methods for hiding the cables depending on your television model.
Use a cable management system
As mentioned earlier, your home entertainment system is one of the biggest sources of sound bar wires. Most new televisions have very thin cables concealed within the television set.
This is an excellent way to hide those ugly speaker cords! Unfortunately, however, this usually isn’t enough. There will still be some small wire strands sticking out from the back of the TV.
These can get in the way or even poke you if you accidentally bump into them. Luckily, there are ways to conceal all of the loose wires behind the TV easily.
A lot of people use something called a cable management arm or holder. These attach to the wall directly above the TV and hold all of the TV’s internal cables away from the floor and each other.
But what about the speakers?
Fortunately, there are several easy solutions for hiding the soundbar wiring too! All you need to do is find a place where they can stick the extra wires. You could pull off a cover panel or cut a hole in a piece of furniture to put them in.
Whatever method you choose, ensure it doesn’t hurt or scratch the finished product.
Buy a soundbar with removable wires
The best way to hide your sound bar wire is by buying one with removable cables or connectors. You can easily remove them if you do not want to use them anymore.
Most people begin using their television set with only one speaker attached, then add another later. It is easy to run into problems when too many cords are off the TV.
It may be hard to find a wireless TV set, but most have at least one small line of connected cable just for volume control. If this does not work for you, try looking online or in brick-and-mortar stores for a TV set with separate speakers.
It would help if you also looked into getting dongles. You do not need to continually reattach and reconnect headphones whenever you switch from watching videos to listening to music. Some come built in, while others require you to connect yours separately!
Connect your soundbar to a TV mounted on the wall
The easiest way to hide your sound bar’s wires is by connecting them to a TV screen with an HDMI port. You can then connect the TV to the appropriate input on the soundbar, and you’ve hidden all the cables!
It works best if you choose a TV with only one audio output source (like a television or streamer). This will keep things simpler for users who want to use the sound bar as a normal speaker setup.
You may also need to purchase an adapter cable, so your TV’s headphone jack can work properly. Some come with headphones, but some do not,t so check out what each model includes before buying.
Connect your soundbar to a TV mounted on the ceiling
Most smart TVs have an HDMI-out port, usually located along the top or side of the screen. These ports typically use a cable that connects directly to the sound bar you want to connect it to.
The problem with this setup is that there are always two cables coming out of the tv: one for the television and another for the soundbar.
If you wanted to take down the soundbar, you would also need to pull up the cable from the television simultaneously, making it difficult to do so.
This can be solved by connecting the soundbar to the wall instead. There are several ways to do this, but we will discuss one method here!
Use a power strip to hide wires behind
Power strips are your best friend when it comes to professional-looking TV installation. They typically have several flat surfaces that hold our devices as we connect them or provide access to other cables.
Some can even be connected to a wall socket, so you don’t need to run a cable from outside! You can easily move the device around without finding new outlets.
By using a power strip, you get the most out of it by being able to add more sockets, remove unneeded ones, and organize the plugs in different ways. It is also very easy to do!
You have to know what kind of plug goes where!
Power strips come in many sizes and styles, but they all share a built-in connector for connecting to a computer or another device. This allows you to attach those two things at any time and easily switch between them.
Use a power strip to hide wires under the TV
One of the annoying features of most smart TVs is their sound bar or speaker, which has cables that connect directly to your television.
These speakers usually have one cable connected to a device, such as a smartphone or a computer, and then there are multiple connectors for the other devices.
Because these televisions have built-in Wi-Fi, you will need to use this feature to stream content from those devices. A power strip can be very helpful if you don’t want to look at all gadgets while watching TV.
A power strip is a good way to conceal the length of cords because it covers them up in a way that people never notice.
You plug your equipment into the power strip and then connect the individual cables to each piece separately. Because they’re grouped, people won’t see each cord’s length.
Use tape to hide wires
One of the annoying features of most smart TVs is the sound bar or speaker that comes with the TV. These often look ugly and are very difficult to conceal.
There are several ways to cover up the sound channel, using materials such as fabric, covers, or gels. However, one of the easiest things you can do is use tape!
Tape is a perfect solution because it is easily movable, and you will find many uses. Even pre-cut tapes from stores contain noise-canceling material, so you don’t have to make your own!
Your smartphone probably has some leftover adhesive paper you can use to create your taping job.
Use boxes to hide wires
There are many ways to conceal or eliminate the sound bar wire from the TV set. Some people use empty plastic containers as coverings for the cable, while others put their cables in bags or even wrap them around furniture.
The best way to do this is by using small, empty cardboard boxes! You can get these at most stores where you will find televisions. Depending on size and quantity, they are usually sold for between $1 and $2 per box.
Placing one box under each speaker’s arm makes it very difficult to tell if any wires are coming from the television. It also helps protect your walls and flooring from getting marked up due to tangled cords.
If you’re looking for a way to tidy up your soundbar setup and hide those unsightly wires, there are a few different options available, as discussed.
You can use specialized cord-covering products, tuck the wires away behind furniture or decor, or even get creative with how you route the cables—whatever method you choose, hiding your soundbar wires is easy.
It will give your home theater a much cleaner look. Thanks for reading!
Frequently Asked Questions about Hiding Soundbar Wires
How can I hide my soundbar wires?
There are a few ways that you can hide your soundbar wires. You can use wire hiders, cord covers, or even electrical tape. We have found that using wire hiders is the best way to hide your soundbar wires.
Wire hiders are easy to install and completely cover your wires. Plus, they come in various colors so that you can match them to your décor.
What is the best way to connect my soundbar to my TV?
An HDMI cable is the best way to connect your soundbar to your TV. HDMI cables provide the best audio and video quality.
How do I hide the wires on my Sonos soundbar?
The best way to hide the wires on your Sonos soundbar is with a wire hider. Wire hiders are easy to install and completely cover your wires. Plus, they come in various colors so that you can match them to your décor.
How do I connect my Bose soundbar to my TV?
An HDMI cable is the best way to connect your Bose soundbar to your TV. HDMI cables provide the best audio and video quality.